Installing The M2 Boss Card Into The M.2 Boss Riser - Dell EMC XC Core XC450 Installation And Service Manual

Figure 74. Removing the M.2 BOSS card from the M.2 BOSS riser
Next steps
If applicable, install a BOSS card into the M.2 BOSS

Installing the M2 BOSS card into the M.2 BOSS riser

Prerequisites
1. Follow the safety guidelines listed in the
2. Follow the procedure listed in
3. Remove the M.2 BOSS
Steps
1. Align and insert the M.2 BOSS card connector with the connectors on the M.2 BOSS riser.
2. Press the blue touch point on the M.2 BOSS card until it is firmly seated.
Figure 75. Installing the M2 BOSS card into the M.2 BOSS riser
Safety instructions.
Before working inside your
riser.
riser.
system.
Installing and removing system components 71