Cooling Fans; Removing A Cooling Fan - Dell EMC XC Core XC450 Installation And Service Manual

Figure 22. Installing the air shroud
Next steps
Follow the procedure listed in

Cooling fans

Removing a cooling fan

Prerequisites
1. Follow the safety guidelines listed in the
2. Follow the procedure listed in
3. Remove the air shroud.
4. Move the cables out of way to access the fan cable connector on the system board.
NOTE: Observe the fan cable routing or make a note on the fan cable routing.
Steps
1. Disconnect the cooling fan cable connected to the fan dongle cable.
2. Holding the blue tab, lift the cooling fan out of the fan cage.
After working inside your
Safety instructions.
Before working inside your
system.
system.
Installing and removing system components 31