Installing The Power Interposer Board - Dell EMC XC Core XC450 Installation And Service Manual

NOTE: Observe the routing of the cable as you remove it from the system.
2. Lift the PIB away from the system.
Figure 88. Removing the power interposer board
Next steps
Replace the power interposer board.

Installing the power interposer board

Prerequisites
1. Follow the safety guidelines listed in the Safety instructions.
2. Follow the procedure listed in Before working inside your system.
Steps
1. Align the slots on the PIB with the hook on the chassis and slide it into place.
2. Using Phillips #2 screwdriver, tighten the screws to secure the PIB to the system.
Installing and removing system components 83