Air Shroud; Removing The Air Shroud; Installing The Air Shroud - Dell EMC XC Core XC450 Installation And Service Manual

Air shroud

Removing the air shroud

Prerequisites
CAUTION: Never operate your system with the air shroud removed. The system may get overheated quickly,
resulting in shutdown of the the system and loss of data.
1. Follow the safety guidelines listed in the
2. Follow the procedure listed in
Steps
Hold the air shroud at both ends and lift the air shroud out of the system.
Figure 21. Removing the air shroud
Next steps
Replace the air shroud.

Installing the air shroud

Prerequisites
1. Follow the safety guidelines listed in the
2. Follow the procedure listed in
Steps
1. Align the slot on the air shroud with the standoff on the chassis.
2. Lower the air shroud into the system until it is firmly seated.
30 Installing and removing system components
Safety instructions.
Before working inside your
Safety instructions.
Before working inside your
system.
system.