KROHNE OPTIWAVE 7300 C Handbook page 53

OPTIWAVE 7300 C
Menu No. Step
A.1.2
01/2008 • 4000172401 - HB OPTIWAVE 7300 R03 en
Function
installation
1 installation type
2 tank height
3A application type
4A stillwell diameter
4B stillwell height
5 blocking distance
6 settings summary
7 save / cancel
Function description
Follow this procedure to
describe the tank and
the product.
The tank material.
The distance from the
tank connecting flange
face/thread stop to the
tank bottom.
The conditions in which
the instrument is used.
If the surface of the
product is flat, select
"storage". If the surface
of the product is
disturbed, select
"process".If the surface
of the product is
agitated with vortexes
and foam, select
"agitator". If the
instrument is installed
in a still well, select
"still well + ...".
The conditions in which
the instrument is used.
For free air applications
only. If the surface of the
product is flat, select
"no disturbance". If the
surface of the product is
disturbed, select
"medium disturbance".If
there are bubbles on the
surface of theproduct
and also vortexes and
foam, select "heavy
disturbance".
The inner diameter of
the stillwell. Step 4 is
available if you set
"stillwell" in step 3.
The height of the
stillwell. Step 4 is
available if you set
"stillwell" in step 3.
A zone given by the user
where it is not possible
to measure.We
recommend at least
100 mm / 4" below the
antenna.
www.krohne.com
OPERATION
Selection list
metal tank; plastic tank;
free air application
min-max: 0.20...80 m /
0.54...262 ft
process; storage;
agitator; process +
stillwell; storage +
stillwell; agitator +
stillwell
no disturbance; medium
disturbance; heavy
disturbance
min-max: 8...200 mm /
0.31...7.88"
min-max: 0...80 m /
0...196.86 ft
antenna extension
(C.1.6)...tank height
(C.1.2)
1
save, cancel
2
6
Default
metal
tank
20 m
process
or
stillwell
+
process
no
distur-
bance
100 mm
/ 3.94"
10 m /
32.81 ft
1
53