OPTIWAVE 7300 C
How to save new settings to the instrument
CAUTION!
When you configure the instrument with the DTM, make sure the instrument display is in
operator mode.
How to save new settings to the instrument
Figure 8-3:
Store to device button
1
•
Change the parameter in a menu item.
•
Click on the button Store to device in the top left corner of the PACTware window.
The DTM shows a WHG warning message that asks you if you want to save your settings to
i
the instrument.
•
Select Store to device to accept the new settings or Cancel to reject them.
The DTM shows again a WHG warning message that asks you if you want to save your
i
settings to the instrument.
•
Select Store to device to accept the new settings or Cancel to reject them.
The DTM will save your new settings to the instrument.
i
01/2008 • 4000172401 - HB OPTIWAVE 7300 R03 en
WHG: SUPPLEMENTARY INSTRUCTIONS
1
www.krohne.com
8
101