Safety Instructions; General Information - Wexiodisk WD-6 DUPLUS Installation And User Manual

Safety instructions

2. Safety instructions
Read the chapter GENERAL INSTRUCTIONS carefully before starting work.

2.1 General information

The machine is CE marked, which means that it complies with the requirements
of the EU Machinery Directive with regard to product safety. Product safety
means that the design of the machine will prevent personal injury or damage to
property. The CE mark is only valid for an unmodified machine. Any damage to
the machine arising from failure to follow the instructions will invalidate the
supplier's warranty and product liability.
Installation, repairs and servicing must be performed by an authorised engineer
in accordance with local and national rules in effect for such work with water and
drainage systems, electricity, ventilation and steam. To ensure electrical safety,
components must only be tested when installed in their normal place in the
machine. We recommend that the work is performed by the manufacturer or one
of the manufacturer's authorised service companies.
To further improve safety during installation, operation and servicing, the operator
and the personnel responsible for installing and servicing the machine should
read the safety instructions carefully.
The machine's electronics are sensitive to electrostatic discharge (ESD), which is
why a static electricity wristband must be used when handling the electronics at
all times.
Before the machine enters service, ensure that the personnel are given the
necessary training in handling and looking after the machine.
WD-6 DUPLUS
5
Rev. 4.0 (202202)