Wexiodisk WD-6 DUPLUS Installation And User Manual page 41

Operating instructions
All the values are laid out in tables, with each table containing a certain number
of rows, one for each value. The table containing the values for the washing
temperature and washing times for the different programmes is "0.0".
The values for washing temperature and washing times are on rows 01 to 04.
To select service mode and change the washing temperature and washing time,
follow these instructions:
•
•
•
•
•
•
•
Table 0.0
Row number
01
02
03
04
When moving to service mode, the washing programme must be finished.
Press the 0/1 button (9). Both the displays will now show two horizontal
dashes "--" and the machine will be in shut-off mode.
Hold the 0/1 button (9) down for approx. 3 seconds until the top display (1)
shows "0.0". When "0.0" appears on the display (1), the machine is in
service mode.
Press P1 (6). The upper display (1) will now show 01, the first row number
in the table. The lower display (4) shows the set washing temperature,
flashing. Only values that flash when displayed can be changed. If the
temperature is to be changed, press P2 (7) to increase the value or P3 (8)
to reduce the value.
If the washing time for a programme is to be changed, use P1 (6) to move
to the next row number in the table. For explanations of row numbers 01,
02, 03 and 04, see table "0.0" above.
When the settings are complete, exit service mode by holding down the 0/
1 button (9) for approx. 3 seconds until both displays show two horizontal
dashes "--". The changed values are now saved.
Return to normal operating mode by then quickly pressing the 0/1 button
(9).
WD-6 DUPLUS
Relates to
Washing temperature
Washing time
programme P1
Washing time
programme P2
Washing time
programme P3
37
Rev. 4.0 (202202)
Range of settings
55 - 70°C
0.4 - 4.0 min.
0.4 - 4.0 min.
0.4 - 4.0 min.