Steam Hood With Extractor (Option) - Wexiodisk WD-6 DUPLUS Installation And User Manual

Installation

3.5.9 Steam hood with extractor (option)

Steam hood with extractor
1.
2.
3.
4.
•
•
•
•
•
WD-6 DUPLUS
4
1
Existing screws
Steam hood
Bracket
Connection for ventilation ø 160 mm
Undo the existing M4 screws at (1).
Replace the existing screws and washers with the longer M4 screws and
the larger washers provided. The steam hood (2) is fastened to (1) using
these screws.
Screw one bracket (3) firmly to the wall behind the machine. The other
bracket must be put in the corresponding position on the back of the steam
hood. Two holes ø 7 mm must be drilled through the plate.
Screw both the brackets (3) together with the screws, washers and nuts
provided.
The ventilation duct is connected to (4).
23
Rev. 4.0 (202202)
3
2
45089