Heartland VALUE Series Assembly Manual page 63

PARTS REQUIRED:
Measure and mark location of hole on outside of right door as shown (Fig. A). Pre-drill
5
hole with 1/4" drill.
Re-drill hole with 1/2" drill.
Keep drilled hole square to
trim to avoid breaking edge of
door stiffener.
6
Insert handle in hole and secure with 1-1/4" screws.
Attach inside handle and secure with set screw as shown.
SCREW
FINISH
Your spring bolt, T-handle and decorative hinges are now installed.
DOOR HARDWARE
x1
SET
1/2" (12 cm) Drill Bit
1/4" (0,6 cm) Drill Bit
RIGHT DOOR
1-3/4" (4,4 cm)
35-3/4"
(90 cm)
1-1/2" (3,8 cm)
Screws
61
x2
1-1/2" (3,8 cm)
Fig. A
TOP VIEW
1-3/4"
(4,4 cm)
1/4" Pre-drill and
1/2" Drill through.