Heartland VALUE Series Assembly Manual page 56

PARTS REQUIRED:
x8
3/8" x 1-3/4" x 71-3/16" (1 x 4,5 x 180,8 cm)
BEGIN
1 Install gable end 71-3/16" corner trim under gable panel, (Fig. A) and flush to eave wall panel (Fig. B).
Secure with 2" finishing nails spaced evenly.
2
Install eave side 71-3/16" corner trim flush to eave soffit and flush along seam of installed corner trim (Fig. C).
Secure with 2" finishing nails spaced evenly.
Flush to
roof panel
Fig. C
Repeat steps for each corner of shed.
FINISH
Your corner trim is now installed.
CORNER TRIM
Fig. A
Flush to
gable panel
10-3/4"
(27,3 cm)
2" (5,1 cm)
Finishing Nails
Seam is fush.
Caulk seam before
painting trim.
x56
NOTE: 10' x 10' Model Shown.
54
2" (5,1 cm)
Fig. B
Flush to
eave panel
71-3/16"
(180,8 cm)
71-3/16"
(180,8 cm)