Setting Up For Video Conferencing - Honeywell HomMed Genesis Touch Quick Start Manual

Genesis Touch Quick Start
10. Select Connect. A screen similar to the following appears and the network you selected appears under
the Wi-Fi option.
11. Press the back key to back out of this screen.
12. Press the back key again. The Settings screen appears.
Setting Up for Video Conferencing
If the patient will use video conferencing, you need to enable Wi-Fi and turn the feature on. Refer to
Enabling Wi-Fi in this document for more information.
To enable video conferencing:
1. From the Vitals Now screen, select the settings icon.The Settings screen appears:
2. Select General. The Enter Password screen appears:
©
16 P4810EN.01 2012 Honeywell HomMed. All rights reserved. 1/19/12