Pulse View - Kemppi MasterTig 535ACDC Operating Manual

Parameter
Post gas
Adjustable parameters in MicroTack welding:
Parameter
Pre gas
MicroTack spot count
MicroTack spot time
MicroTack pause time
Post gas
"Welding processes and features" on page 62

3.2.5 Pulse view

© Kemppi
Value
0.0 s ... 30.0 s / Auto, step 0.1 s (Default =
Auto)
Value
0.0 s ... 10.0 s, Auto, 0.1 s step (Default =
Auto)
1 ... 5 / Continuous, step 1 (Default = 1)
1 ms ... 200 ms, step 1 ms (Default = 10
ms)
10.0 ms ... 100 ms, step 1 ms (Default = 50
ms)
0.2 s ... 2.0 s, step 0.1 s
0.0 s ... 30.0 s / Auto, step 0.1 s (Default =
Auto)
41
Operating manual - EN
Note
Note
If Lift TIG is used, MicroTack graph shows
only 1 spot and the spot count para-
meter is not visible.
This is not visible in the settings if the
MicroTack pulse count is only 1.
MasterTig 535ACDC
1921940 / 2140