Table of Contents
Advertisement
To browse through channels and select channels:
1.
Go to the Memory channels view.
2.
Turn the control knob (1) to switch between channels. The highlighted channel is automatically selected.
To save or delete channels:
1.
Turn the control knob (1) to highlight a channel.
2.
Open the channel actions menu by pressing the control knob button (1). The available actions are shown: Cancel,
Save changes, Save to and Delete.
3.
Select an action with the control knob (1).
3.2.4 Start & stop sequence view
The parameters diagram view makes base parameter identification and setting easy. From pre-gas time to post-gas time
and everything in between, you can quickly select and adjust the needed parameter value.
© Kemppi
39
MasterTig 535ACDC
Operating manual - EN
1921940 / 2140
Advertisement
Table of Contents
