Table of Contents
Advertisement
No.
Problem
3
Power trim does not
operate (Electric motor
does not operate)
4
Power trim does not
operate (Electric motor
operates but stern-drive
does not move)
© 6/2016 Ilmor Marine Engines, Version 1.0
Possible cause
Blown fuse
Circuit breaker is tripped. Wait until the breaker
Loose or dirty electrical
connections or damaged
wiring.
Trim pump oil level is
low.
Stern-drive binding in
gimbal ring.
TROUBLESHOOTING
Action
Replace the fuse.
cools down and the
breaker is restored.
Check all associated
electrical connections
and wires (especially
battery cables). Clean
and tighten faulty
connection. Repair or
replace wiring.
Fill pump with oil.
Check for obstruction.
Consult your authorized
Ilmor Marine dealer or
distributor.
Reference
page
2-11
2-11
2-11
3-8
–
5-2
Advertisement
Table of Contents
