ILMOR One-Drive Owner's Manual page 45

1. Remove the oil reservoir from the bracket (Figure 4-9, 1).
2. Empty the contents into a container large enough to hold the drained
gear oil.
3. Install the oil reservoir (Figure 4-9, 2) in the bracket.
4. Place the stern-drive in full trim limit OUT position.
5. Remove the oil fill/drain plug (Figure 4-10, 1) and gasket (Figure 4-10, 2).
6. Drain the oil.
7. Remove the oil vent plug (Figure 4-11, 1) and gasket (Figure 4-11, 2).
Allow the oil to drain completely.
© 6/2016 Ilmor Marine Engines, Version 1.0
1
2
Figure 4-9
Figure 4-10
2
1
Figure 4-11
2
1
MAINTENANCE
4-13