Periodic Maintenance Table - ILMOR One-Drive Owner's Manual

PERIODIC MAINTENANCE TABLE

¡: Check or clean ¯: Replace
Check the stern-drive oil level
(reservoir), fill if necessary
Check the trim pump oil level,
fill if necessary
Check the power steering fluid,
fill if necessary
Check the water inlets for
debris or marine growth, clean if
necessary
Check the seawater inlet hole,
clean if necessary
Inspect the anodes and replace if
50 percent eroded
Replenish the oil in stern-drive
Lubricate the propeller shaft and
retorque the nut
1
Touch-up the stern-drive paint
and spray with corrosion guard
Change the stern-drive oil
Retorque the gimbal ring to
steering shaft connection
Inspect the bellows and the
clamps
Check the engine alignment
Lubricating the steering shaft
bushing
Lubricate the unit bearing
(gimbal housing)
Lubricate the engine coupler
Check the circuit for loose or
damaged connections
Test the I-CaPS output on
One-Drive
Check the steering system for
loose, missing or damaged parts
Check the remote control for
loose, missing or damaged parts
© 6/2016 Ilmor Marine Engines, Version 1.0
Daily
See Daily Checks
on page 3-4
Before operation
¡
Before operation
¡
Before operation
¡
4
: Consult your authorized Ilmor Marine dealer or distributor
l
Every
Weekly 50
Hours
¡
¡
¡
First time
only
¡
First time
only
¯
¡
MAINTENANCE
Every Every
100 250
Hours Hours
¡
¡
First time
only
3
¯
¡
¡
l
¡
¡
¡
¡
¡
¡
¡
Every
Year
¡
¯ 3
¡
¡
l
¡
¡
¡
¡
¡
¡
¡
4-3