Every 1000 Hours Of Operation - ILMOR One-Drive Owner's Manual

MAINTENANCE
Description Where used
Multi-purpose heavy-duty type lithium Universal-joint shaft
grease, NLGI #2 splines and O-rings
NOTICE: Use new O-ring seals each time the drive unit is installed.
Torquing the Rear Engine Mount Bolts
NOTE: Refer to the Engine Installation Manual and/or Operation Manual
for front engine mount information.
Torque the rear engine mount bolts (Figure 4-17, 1).
1
Figure 4-17
Engine rear mount bolt torque
N·m lb-ft
45 33

Every 1000 Hours of Operation

Perform the following maintenance every 1000 hours of operation.
• Replace of friction disc (Light duty commercial applications only)
Replace of Friction Disc (Light Duty Commercial Applications Only)
Consult your authorized Ilmor Marine dealer or distributor.
4-17
© 6/2016 Ilmor Marine Engines, Version 1.0