Every Year - ILMOR One-Drive Owner's Manual

SECTION 4 ILMOR ONE-DRIVE OWNER'S MANUAL
4-18

Every Year

Perform the following maintenance every year of operation.
• Retorquing the gimbal ring to steering shaft connection
• Inspecting the bellows and the clamps
• Checking the engine alignment
• Lubricating the steering shaft bushing
• Lubricating the unit bearing (gimbal housing)
• Lubricating the engine coupler
• Checking the circuit for loose or damaged connections
• Testing the I-CaPS unit output
• Checking the steering system for loose, missing or damaged parts
• Checking the remote control for loose, missing or damaged parts
• Lubricating the cable and the linkages
• Touching-up the stern-drive paint and spray with corrosion guard
• Changing the stern-drive oil
• Retorqueing the rear engine mounts
• Replace of friction disc (Light duty commercial applications only)
Retorquing the Gimbal Ring to Steering Shaft Connection
See Retorquing the Gimbal Ring to Steering Shaft Connection on page
4-8.
Inspecting the Bellows and the Clamps
See General Inspection on page 4-4.
Checking the Engine Alignment
See Checking the Engine Alignment on page 4-8.
Lubricating the Steering Shaft Bushing
See Lubricating the Steering Shaft Bushing on page 4-8.
Lubricating the Unit Bearing (Gimbal Housing)
See Lubricating the Unit Bearing (Gimbal Housing) on page 4-9.
Lubricating the Engine Coupler
See Lubricating the Engine Coupler on page 4-6.
© 6/2016 Ilmor Marine Engines, Version 1.0