Every 2 Years - ILMOR One-Drive Owner's Manual

MAINTENANCE
Checking the Circuit for Loose or Damaged Connections
See Checking the Circuit for Loose or Damaged Connections on page
4-9.
Testing the I-CaPS Unit Output
See Ilmor Cathodic Protection System on page 2-11.
Checking the Steering System for Loose, Missing or Damaged Parts
See Checking the Steering System for Loose, Missing or Damaged Parts on
page 4-9.
Checking the Remote Control for Loose, Missing or Damaged Parts
See Remote Controls on page 2-9.
Touching-Up the Stern-Drive Paint and Spray with Corrosion Guard
See Touching-Up the Stern-Drive Paint and Spray with Corrosion Guard
on page 4-11.
Changing the Stern-Drive Oil
See Changing the Stern-Drive Oil on page 4-12.
Retorquing the Rear Engine Mounts
See Torquing the Rear Engine Mount Bolts on page 4-17.
Replace of Friction Disc (Light Duty Commercial Applications Only)
Consult your authorized Ilmor Marine dealer or distributor.

Every 2 Years

Perform the following maintenance every 2 years of operation.
• Replace U-joint hardware
• Replace control cable bellows
Replace U-Joint Bellows
Consult your authorized marine dealer or distributor.
Replace Control Cable Bellows
Consult your authorized marine dealer or distributor.
4-19
© 6/2016 Ilmor Marine Engines, Version 1.0