Troubleshooting - ILMOR One-Drive Owner's Manual

No. Problem
1 Remote control operates
hard, binds, has
excessive free play or
makes unusual sounds
2 Steering wheel turns
hard or jerky
5-1
Section 5

TROUBLESHOOTING

Possible cause
Insufficient lubrication
on the shift and throttle
(if applied) linkage
fasteners.
Obstruction in the shift
or throttle (if applied)
linkages.
Loose or missing shift
and throttle linkages.
Shift or throttle (if
equipped) cable is
kinked.
Low power steering
pump fluid level.
Stern-drive belt is loose
or in poor condition.
Insufficient lubrication
on the steering
components.
Insufficient lubrication
on the transom gimbal
housing assembly and
swivel shaft.
Loose or missing
steering fasteners or
parts.
Contaminated power
steering fluid.
Action
Lubricate.
Remove the obstruction.
Check all throttle
linkages. If any are loose
or missing, consult your
authorized Ilmor Marine
dealer or distributor
immediately.
Straighten the cable or
have your authorized
Ilmor Marine dealer
or distributor replace
the cable if damaged
beyond repair.
Check for leaks. Refill
the system with fluid.
Replace and/or adjust.
Lubricate.
Lubricate.
Check all parts and
fasteners. If any are
loose or missing,
consult your authorized
Ilmor Marine dealer or
distributor immediately.
Consult your authorized
Ilmor Marine dealer or
distributor.
© 6/2016 Ilmor Marine Engines, Version 1.0
Reference
page
4-9
4-9
–
4-9
–
–
–
4-8
4-8
–