Check The Power Trim Pump Fluid - ILMOR One-Drive Owner's Manual

SECTION 3 ILMOR ONE-DRIVE OWNER'S MANUAL
3-7

Check the Power Trim Pump Fluid

NOTICE: Always check the oil level with stern-drive in the full DOWN/
TRIM-IN position.
1. Place the stern-drive in full DOWN/TRIM-IN position.
2. Observe the oil level in the reservoir. The oil level should be maintained
within the MIN and MAX lines (Figure 3-4, 2) on the reservoir
(Figure 3-4, 1).
1
2
Figure 3-4
© 6/2016 Ilmor Marine Engines, Version 1.0