Daily Checks; Visual Checks; Check The Stern-Drive Oil Level - ILMOR One-Drive Owner's Manual

DAILY CHECKS

All stern-drives have been submitted to a test run before shipment.
Visual checks for leakage should be made from time to time.
Before operating the stern-drive, make sure it is in good operating
condition. Make sure you check the following items and have any repairs
completed before you operate the stern-drive.
NOTICE: Anytime the boat is left in the water and the engine is not
running, the drive must be left in the fully down position. This will keep
the anodes in the water and will keep the exhaust pipe engaged with
the exhaust port of the drive.

Visual Checks

A CAUTION! If any problem is noted during the visual check, the
necessary corrective action should be taken before you operate the
stern-drive.
1. Check for oil leaks.
2. Check for damaged or missing parts.
3. Check for loose, missing or damaged fasteners.
4. Check the electrical harnesses for cracks, abrasions, and damaged or
corroded connectors.

Check the Stern-Drive Oil Level

Description
MV8 Quick Silver
series
* Quick Silver is a registered trademark of Brunswick Corporation.
NOTE: The oil level will rise and fall during operation. Check the oil level
before starting, when the engine is cold.
© 6/2016 Ilmor Marine Engines, Version 1.0
* High Performance
®
Gear Lube
STERN-DRIVE OPERATION
Where used
Oil reservoir
3-4