Table of Contents
Advertisement
Software Installation
Software Installation
Double click installation package, Follow the
instructions as the window pops up. Users can
either choose the default installation path or click
the Browse button to select the installation path.
Default installation is suggested.
When the acquired activated file window
pop-ups, you can choose multiple device types,
then click "Next".
Please confirm there is only one device
connected. Choose the mode to get activated file:
Online activation and local activation (click the
upper right corner icon). After activating a device,
you can unplug the device and plug in other device
to continue activating. When finishing click "Next".
Note：
If you want use both Pro and Pro+,
you should activate the two device type
separately. Or you can activate device after
installation, refer to
Advanced
When installation is finished, there will be a shortcut of
the software
on the desktop.
In the next step, we need to check whether the
camera driver installation is successful, right click
"Computer", choose "Computer Management"-"Device
Management"-"Imaging devices" to check if the two
cameras display normally (two cameras will be found
when there is no color module).
When there is color module, check if there are three
cameras, as shown below.
Software Uninstall
Open the start menu, choose Shining3d_EinSca-Pro----Click "Uninstall or Modify Einscan", as
shown below.
options.
8
Advertisement
Table of Contents
Need help?
Do you have a question about the EinScan-Pro+ and is the answer not in the manual?