Calibration Precaution - Shining 3D EinScan-Pro+ User Manual

Calibration Precautions
You must finish all the calibration steps according to the instruction when you calibrate at
the first time. If resolution is lost under HD Mode, or environment light changes and influences
the scanning, you can do line calibration or white balance calibration solely.
Situations as below need do calibration again:
① When the scanner is used for the first time or after long time without using.
② When there is strong vibration during the transportation.
③ When alignment mistake or failure frequent appear during the scanning.
④ When environment light changes under Color Scan, white balance calibration is
needed.
⑤ When scanning data is incomplete and quality is much worse during the
scanning.
Note:
Make sure to keep the calibration board still and then click "Snap" to collect during
calibration.
20