Shining 3D EinScan-Pro+ User Manual page 46

Handheld Rapid Scan Handheld Rapid Scan
Project
You can new or open projects. The default project location is the desktop, then it will
remember where the user last created a new project.
Note:
1. Handheld rapid scan will follow whether the imported project is mark point align or
feature align. If imports a mark point align project or global mark point project when
there is no such function, you can't do further scan but only edit or merge the project.
2. Handheld scan mode: When import project, and continue the scan, the scanning will
be in accordance with the imported project resolution.
Main Menu
If you want to change the scan modes, click the button to go back to the homepage to
select the scan mode.
Mouse Operation Prompts
Lower left corner of the interface is the mouse operation prompts:
After scanned or imported project, the prompt text is as follows:
Hold down the left mouse button: Rotate the object;
Hold down the middle mouse button: pan the object;
Hold down the mouse wheel: Scroll up and down to the object; scroll down to enlarge
the object;
Hold down the Shift + left mouse button: select the area on the object;
45