Shining 3D EinScan-Pro+ User Manual page 40

Handheld Rapid Scan
When the position tracking fails, it will appear
previous markers to get to be tracked again to continue scan.
Distance Bars
When scanning it will show distance bars on the left, green indicates the optimum dist ance,
blue indicates the distance is too far, red indicates the distance is too close. Get the best position
according to the color bars. You could also refer that to the light on the equipment handle, the
indication of which is as same as above.
Pause
Click the button or press the button
with it. Click Scan and continue from where have been already scanned.
project, and does not support the deletion of mark points.
SHIFT+Left mouse：Select excess parts, the selected section will
display in red, as shown on the right.
Delete selected data
Click the button and "DELETE" in the keyboard to delete
selected data.
Note：
Handheld scan mode does not support the deletion
of mark points. Handheld rapid scan, feature align,
use the edit button to delete all the data, continue
scanning will restore the last deleted data.
on the scanner to suspend scanning and check
Edit buttons:①Deselect ②Revert ③Delete ④Undo⑤Show/Hide
Stripes
The data can be edited only when suspend scanning or import a
, you need to go back to the
39