Shining 3D EinScan-Pro+ User Manual page 39

Handheld Rapid Scan
If the scanning presents purple color and
indicates that the position tracking fails. You need to go back to the previous scan area and wait
for about 3 seconds and adopt merging features for about several seconds, and then try to scan
normally.
Note：
When the scanned data quality is not good, please check the distance, and if the
brightness is proper in good distance condition. Check brightness through exposure
whether the light frame is clearly shooting on the object.
If the surface of the object has mark points, the software will recognize the mark points
and scan. The green area is the current scan, as shown below
appears, it
38