Table of Contents
Advertisement
Auto Scan
Unwatertight
Data simplification
After simplification, the polygon numbers, size and surface detail of data will be reduced
accordingly. Check the simplify check box and set the ratio, the default is 100%.
The comparison of detail between before simplification and after simplification (at 30% simplify
proportion).
Before simplification
Fill holes
The default does not check the mark point and fill hole, check the fill hole you need set
perimeter, choose 10-100mm perimeter to fill the hole, less than the perimeter of the hole will
be filled. Mark point fill hole as an example.
Watertight
After simplification
27
Advertisement
Table of Contents
Need help?
Do you have a question about the EinScan-Pro+ and is the answer not in the manual?