Shining 3D EinScan-Pro+ User Manual page 31

Project
You can new or open projects. The default project location is the desktop, then it will
remember where the user last created a new project.
Note：
1. The scanning projects created by different scan modes (Industry fixed scan,
handheld HD scan and handheld rapid scan) cannot be reciprocally imported. The
projects created by auto scan and fixed scan ( without turntable )
reciprocally imported. After importing the project, direct access to scan, choose
the scan mode based on whether the imported project is texture. The texture
project cannot be continued to scan if the scanner is without color texture camera.
Main Menu
If you want to change the scan modes, click the button to go back to the homepage to
select the scan mode.
Mouse Operation Prompts
Lower left corner of the interface is the mouse operation prompts:
After scanned or imported project, the prompt text is as follows:
Hold down the left mouse button: Rotate the object;
Hold down the middle mouse button: pan the object;
Hold down the mouse wheel: Scroll up and down to the object; scroll down to enlarge
the object;
Auto Scan Auto Scan
can be
30