Thermo Scientific iCAP Qnova Series Pre-Installation Requirements Manual page 83

Power Conditioning Devices
Uninterruptible Power Supply
Thermo Scientific
Various line voltage conditioning devices are available that can correct
your line voltage problem. If you have good regulation, but the power
line disturbance analyzer shows transient voltages, an isolation/noise
suppression transformer should be adequate to resolve the problem. If
there are both transient and regulation problems, you should consider
power conditioners, which can control both of these problems.
Your electrician should install the buck/boost transformer before the
installation of your system is started.
Tip For compliance and safety, ensure that your power conditioning
devices are certified by recognized domestic and international
organizations (for example, UL, CSA, TÜV, and VDE).
If your local area is susceptible to corrupted power or power disruptions,
an uninterruptible power supply (UPS) should be installed in your
laboratory.
Tip For compliance and safety, ensure that your uninterruptible power
supply (UPS) devices are certified by recognized domestic and
international organizations (for example, UL, CSA, TÜV, and VDE).
iCAP Qnova Series ICP-MS Pre-Installation Requirements Guide (P/N BRE0006946, Revision B)
General Preinstallation Information
Operating Environment
6-7