Models And Specifications; Models; Front And Rear Views - Keysight Technologies BT2152B Operating And Service Manual

Models and Specifications

Front and Rear Views

Specifications
Characteristics
External Temperature Measurement
Dimensions and Weight

Models

Keysight BT2152A - 32 channel Self-Discharge Analyzer
l
Keysight BT2152B - 32 channel Self-Discharge Analyzer
l
Front and Rear Views
1. Line switch Turns the unit on or off
2. Status Indicators Power: Green indicates power is on.
and switches LAN: Green indicates the LAN connection is active. Flashing green indicates an LXI identification
query is sent. Flashing blue indicates a SCPI command is received. Red indicates a LAN fault.
Ready: Amber indicates the unit is warming up. A warmup time of 1 hour is required. Green indic-
ates the unit is ready to start the test.
Test: Flashing blue indicates that cell matching has been initiated. Blue indicates a test is running.
Off indicates no test is running. Flashing orange indicates calibration.
Error: Red indicates an error has occurred. Off indicates protection is cleared.
LAN reset: This recessed switch performs a software system LAN reset.
Aux: This switch is reserved for future use.
Stop: This button aborts any current measurements and sequences. Must be held for 1 second.
The unit returns to a state of being ready for initialization.
3. Air Inlet Air inlet requires a minimum of 6 inch (15 cm) clearance
Keysight BT2152A/B Operating and Service Guide
1 Quick Reference
13