Safety Notices - Keysight Technologies BT2152B Operating And Service Manual

Legal and Safety Information

Safety Notices

The following general safety precautions must be observed during all phases of operation of this
instrument. Failure to comply with these precautions or with specific warnings or instructions
elsewhere in this manual violates safety standards of design, manufacture, and intended use of the
instrument. Keysight Technologies assumes no liability of the customer's failure to comply with the
requirements.
General
Do not use this product in any manner not specified by the manufacturer. The protective
features of this product may be impaired if it is used in a manner not specified in the
operating instructions.
Environmental Conditions
Never use the instrument outside of the specified environmental conditions described
under Environmental
Ground the Instrument
This product is provided with protective earth terminals. To minimize shock hazard, the
instrument must be connected to the AC mains through a grounded power cable, with
the ground wire firmly connected to an electrical ground (safety ground) at the power
outlet. Any interruption of the protective (grounding) conductor or disconnection of the
protective earth terminal will cause a potential shock hazard that could result in injury
or death.
Do Not Operate in an Explosive Atmosphere
Do not operate the instrument in the presence of flammable gases or fumes.
Do Not Remove the Instrument Cover
Only qualified, service-trained personnel who are aware of the hazards involved should
remove covers. Always disconnect external power.
Do Not Modify the Instrument
Do not install substitute parts or perform any unauthorized modification to the product.
Return the product to a Keysight Sales and Service Office for service and repair to
ensure that safety features are maintained.
Fuses
The instrument contains an internal fuse, which is not customer accessible.
9
Conditions.
Keysight BT2152A/B Operating and Service Guide