Configure Command - Keysight Technologies BT2152B Operating And Service Manual

CONFigure Command

CONFigure:INSitu:CURRent HIGH|MED|LOW
CONFigure:INSitu:CURRent?
Configures the current used during the in situ wire resistance calibration.
HIGH - specifies ±9 mA
MED - specifies ±5 mA
LOW - specifies ±1 mA
Parameter
HIGH | MED | LOW,
*RST LOW
To set the medium in situ current: CONF:INS:CURR MED
Keysight BT2152A/B Operating and Service Guide
4 Programming Reference
Typical Return
LOW
69