Table of Contents
Advertisement
Safety Symbols
A WARNING notice denotes a hazard. It calls attention to an operating procedure, practice, or the
like that, if not correctly performed or adhered to, could result in personal injury or DEATH. Do not
proceed beyond a WARNING notice until the indicated conditions are fully understood and met.
A CAUTION notice denotes a hazard. It calls attention to an operating procedure, practice, or the
like that, if not correctly performed or adhered to, could result in damage to the product or loss of
important data. Do not proceed beyond a CAUTION notice until the indicated conditions are fully
understood and met.
Direct current
Alternating current
Frame or chassis terminal
Standby supply. Unit is not completely disconnected from AC mains when switch is off.
Earth ground terminal
The CE mark is a registered trademark of the European Community.
The ETL mark is a registered trademark of Intertek.
The RCM mark is a registered trademark of the Spectrum Management Agency of Aus-
tralia. This signifies compliance with the Australian EMC Framework regulations under
the terms of the Radio Communications Act of 1992.
South Korean Class A EMC Declaration
This equipment is Class A suitable for professional use and is for use in electromagnetic
environments outside of the home.
Contains one or more of the 6 hazardous substances above the maximum con-
centration value (MCV), 40 Year EPUP.
ISM1-A
This text indicates that the instrument is an Industrial Scientific and Medical Group 1
Class A product (CISPER 11, Clause 4).
ICES/NMB-
This text indicates product compliance with the Canadian Interference- Causing Equip-
001
ment Standard (ICES-001).
Keysight BT2152A/B Operating and Service Guide
Risk of electric shock
Refer to accompanying documents
Legal and Safety Information
8
Advertisement
Table of Contents
