RCMDVI101 Front View
No.
Component
1
PC/KVM port
2
CPU COM
(RS-232 DTE)
port
3
local console
COM (RS-232
DCE) port
4
USB Type-B
port
5
laptop USB
console (LUC)
port
6
reset button
7
power LED
Use the KVM cable provided to connect the PC / workstation
to be controlled through this port.
Connect a serial data communication equipment device (e.g. a
modem or PC) to this port. See DCE and DTE Ports, page 24.
Connect a serial data terminal equipment device (e.g. a PC or
touch panel) to this port. See DCE and DTE Ports, page 24.
Connect the keyboard/mouse to the PC / workstation you are
installing using the USB Type-A to USB Type-B cable
provided.
For laptop local access (See Local Access, page 121),
connect the laptop to this port using the USB Type-A to USB
Mini-B cable provided.
Make sure the mode of USB IO Settings (see USB IO
Settings, page 73) is set to LUC.
If the mode of USB IO Settings is set to Virtual Media, this port
will not work.
Press the reset button for more than 3 seconds to revert the
unit back to factory default settings.
Lights green when the unit is powered on.
Chapter 1. Introduction
Description
15