Table of Contents
Advertisement
Serial Console
For this function to work, the serial device must be connected to the Local
Console COM (RS-232 DCE) port.
To configure the RCM KVM over IP Switch to interact with the connected
serial device, you need to set its parameters to match the parameters of the
device in the Port Property Settings.
Select the values that match the ones used by the connected serial console
device. The port property settings that the RCM KVM over IP Switch supports
are as follows:
Baud Rate: This sets the port's data transfer speed. Choices are from 300–
115200 (use the drop-down menu to see them all). Set this to match the
baud rate setting of the serial console device. Default is 115200 (basic
setting for many serial console devices).
Data Bits: This sets the number of bits used to transmit one character of
data. Choices are: 7 and 8. Set this to match the data bit setting of the serial
console device. Default is 8 (which is the default for the majority of serial
console devices).
Parity: This bit checks the integrity of the transmitted data. Choices are:
None; Odd; Even. Set this to match the parity setting of the serial console
device. Default is None.
Chapter 5. Configuration
69
Advertisement
Table of Contents
