Table of Contents
Advertisement
RCM KVM over IP Switch User Manual
Unplug the power cable before removing the power supply.
If the system has multiple sources of power, disconnect power from the
system by unplugging all power cables from the power supplies.
Never push objects of any kind into or through cabinet slots. They may
touch dangerous voltage points or short out parts resulting in a risk of fire
or electrical shock.
Do not attempt to service the device yourself. Refer all servicing to
qualified service personnel.
If the following conditions occur, unplug the device from the wall outlet
and bring it to qualified service personnel for repair.
The power cord or plug has become damaged or frayed.
Liquid has been spilled into the device.
The device has been exposed to rain or water.
The device has been dropped, or the cabinet has been damaged.
The device exhibits a distinct change in performance, indicating a need
for service.
The device does not operate normally when the operating instructions
are followed.
Only adjust those controls that are covered in the operating instructions.
Improper adjustment of other controls may result in damage that will
require extensive work by a qualified technician to repair.
The socket-outlet shall be installed near the equipment and shall be easily
accessible.
Inlet power cord selection: Detachable, maximum 2.0 m long, 18 AWG,
flexible cord (125V, 10A, 3C, NEMA 5-15P). Or, 0.75mm
cord (E.g.: H05VV-F, 250V 10A).
138
2
, 3G, flexible
Advertisement
Table of Contents
