To restore a previous backup, do the following:
1. If a password was set when the backup was made, key the same password
that you used to save the backup file in the Password field. If a password
was not set, you can leave this field blank.
2. Click Browse and navigate to the file and select it.
3. Select which parts of the backup you wish to restore:
Select Select All to restore all information
Select User Account to only restore User Account information
Select User Select to choose which backed up information you wish to
restore. When this was selected, check/uncheck the checkbox(es) to
select/deselect what you wish to be restored.
4. When you have made your selections, click Restore.
After the file is restored, a message appears to inform you that the
procedure succeeded.
Chapter 5. Configuration
43