RCM KVM over IP Switch User Manual
PPP Settings
After enabling Out of Band Access, the Enable Dial Back, and Enable Dial
Out functions become available and are described in the following sections.
Dial Back
If this function is enabled, the unit disconnects calls being dialed in, and dials
back according to the options specified below:
Enable Fixed Number Dial Back: When enabled, the RCM KVM over
IP Switch hangs up the modem during an incoming call, and dials back to
the modem whose phone number is specified in the Phone Number field.
Enter the phone number of the modem that you want the RCM KVM over
IP Switch to dial back to in the Phone Number field.
Enable Flexible Dial Back: When enabled, RCM KVM over IP Switch
dials back to any modem that is convenient for the user.
Enter the password that the users must specify in the Password field.
When connecting to the RCM KVM over IP Switch's modem, users will
specify the phone number of the modem that they want the RCM KVM
over IP Switch to dial back to as their Username, and specify the password
set in the Password field for their password.
66