Table of Contents
Advertisement
Icon
Click to bring up the on-screen keyboard (see The On-Screen
Keyboard, page 108).
Click to select the mouse pointer type.
Note: This icon changes depending on which mouse pointer type is
selected (see Mouse Pointer Type, page 109).
Click to toggle Automatic or Manual mouse sync.
When the selection is Automatic, a green mark appears on the
icon.
When the selection is Manual, a red mark appears on the icon.
See Mouse DynaSync Mode, page 110 for a complete explanation
of this feature.
These icons show the Num Lock, Caps Lock, and Scroll Lock status
of the remote computer.
When the lock state is On, the LED is bright orange.
When the lock state is Off, the LED is dull blue.
Click on the icon to toggle the status.
Note: These icons and your local keyboard icons are in sync.
Clicking an icon causes the corresponding LED on your keyboard to
change accordingly. Likewise, pressing a Lock key on your
keyboard causes the icon's color to change accordingly.
Click to bring up the Macro dialog box (see Macros, page 91 for
more details).
Click to bring up the Message Board (see The Message Board,
page 102).
Click to bring up the Virtual Media dialog box. The icon changes
when a virtual media device is mounted on the port. See Virtual
Media, page 104, for specific details.
Note: This icon displays in gray when the function is disabled or not
available to the user.
Click this to turn the speaker on or off. This icon grays out and
becomes not functional when the microphone connected to the local
console is enabled. To enable / disable the speakers from the local
console OSD, see Local OSD, page 123.
Note: The microphone connected to the local console have priority
over the speakers connected to the remote console.
Chapter 7. The Windows Client Viewer
Function
89
Advertisement
Table of Contents
