Table of Contents
Advertisement
Once the system macros have been created, you can choose to run any one of
them upon logging out of the RCM KVM over IP Switch (see Customization,
page 73 for details).
Note: 1. Information about the Search function is given on page 96.
2. Systems macros are stored on the RCM KVM over IP Switch,
therefore macro names may not exceed 64 English alphanumeric
character, and hotkey combinations may not exceed 256 Bytes (each
key usually takes 3–5 Bytes).
Video Settings
The Video Settings dialog box allows you to adjust the placement and
picture quality of the remote screen display on your monitor.
The adjustment options are as follows:
Option
Performance
Enhanced Text
Mode
Advanced
Click this to control the transparency of the Video Settings dialog
box.
Select the type of Internet connection that exists between the
Local Client computer and the RCM KVM over IP Switch. The
RCM KVM over IP Switch will use that selection to automatically
adjust the Video Quality and Detect Tolerance settings to
optimize the quality of the video display.
Since network conditions vary, if none of the pre-set choices
seem to work well, you can select Customize and use the Video
Quality and Detect Tolerance slider bars to adjust the settings
to suit your conditions.
Check this to solve video display problems related to video
screen resolution that affect some interface systems (e.g., Sun
Blade 1000 servers).
See page 100 for details.
Chapter 7. The Windows Client Viewer
Usage
99
Advertisement
Table of Contents
