Table of Contents
Advertisement
IPv6 Stateless Autoconfiguration
If the RCM KVM over IP Switch's network environment contains a device
(such as a router) that supports the IPv6 Stateless Autoconfiguration function,
the RCM KVM over IP Switch can obtain its prefix information from that
device in order to generate its IPv6 address. For example, 2001::74ff:fe6e:59.
As above, the address is displayed at the bottom of the Basic Setting page.
Once you have determined what the IPv6 address is, you can use it when
logging in from a browser or the Win and Java Client AP programs.
For example:
If you are logging in from a browser, you would key in
http://[2001::74ff:fe6e:59]
for the URL bar.
If you are logging in with the AP program, you would key:
2001::74ff:fe6e:59
for the IP field of the Server panel (see The Windows Client Connection Screen
is shown below and each components are described in the table., page 83).
Appendix
145
Advertisement
Table of Contents
