System Leds; Port Leds; Installation Options; Power Conservation - Allied Telesis GS950 PS V2 Series Installation Manual

Chapter 1: Overview

System LEDs

Port LEDs

Installation
Options
Power
Conservation
MAC Address
Table
22
 Single-port bidirectional 1000Mbps SFP 1000Base-SX/LX fiber
optic transceivers
 1000Mbps 1000Base-T copper transceiver
Note
Transceivers are purchased separately. For a list of supported
transceivers, refer to the product's data sheet on the Allied Telesis
web site.
The port LEDs are briefly described here:

Power SYS LED

Maximum PoE+ LED
The system LEDs are described in "SYSTEM LED" on page 30.
The port LEDs are briefly described here:
 Link/activity and PoE+ LEDs for the copper ports. Refer to "Link/
Activity and PoE LEDs" on page 31.
 Link/activity LEDs for the SFP ports. Refer to "SFP LEDs" on
page 34.
 eco-Friendly button for turning off the LEDs to conserve electricity.
Refer to "eco-Friendly Button" on page 36.
The switch supports the following installation options:
 Standard 19-inch equipment rack
 Desk or table
 Wall
The switch has the following power conservation features:

eco-Friendly button to turn off the port LEDs when the system is
not being monitored
 IEEE 802.3az Energy-Efficient Ethernet (EEE) reduces power
during periods of no data activity

High-efficiency power supply
Here are the basic features of the MAC address table:
 Storage capacity up to 16K MAC address entries
 Automatic learning and aging