Sfp Ports - Allied Telesis GS950 PS V2 Series Installation Manual

SFP Ports

The SFP ports support the following types of transceivers:
 SFP 100Mbps (100Base-FX) fiber optic transceivers
 SFP 1000Mbps (1000Base-SX/LX) fiber optic transceivers
 Single-port bidirectional SFP 1000Mbps (1000Base-SX/LX) fiber
optic transceivers

1000Mbps (1000Base-T) copper transceiver
Note
Transceivers are purchased separately. For a list of supported
transceivers, refer to the product's data sheet on the Allied Telesis
web site at www.alliedtelesis.com.
Additional information include:
 Transceivers are hot-swappable. You can install or remove them
while the switch is powered on.
 To ensure compatibility, you should only use transceivers that have
been approved by Allied Telesis for use in this product.
GS950 PS V2 Series of Gigabit Ethernet PoE+ Switches Installation Guide
29