System Leds - Allied Telesis AT-9424Ts Installation Manual

System LEDs

The system LEDs on the front panel display the general status information
described in Table 5.
LED State
FAULT or Off
FLT
Solid
Red
Flashing
Red
MASTER Off
or MSTR
Green
RPS Off
Green
POWER Off
or PWR
Green
Table 5 System LEDs
Description
Normal operation.
The switch or management software has
malfunctioned. (Refer to Chapter 7,
"Troubleshooting" on page 91 for instructions
on how to troubleshoot a problem.)
The switch is saving its configuration or is
downloading a new version of the AT-S63
Management Software.
The switch is not a member of an enhanced
stack or has an enhanced stacking status of
slave or unavailable.
The enhanced stacking feature is not related to
or supported on AT-9400Ts Stacks. For
information on enhanced stacking, refer to the
AT-S63 Management Software Features
Guide.
The switch has an enhanced stacking status of
master.
No optional redundant power supply is
connected to the switch.
An optional redundant power supply is
physically connected to the switch and may be
powered on or off.
The switch is not receiving power.
The switch is receiving power.
AT-9400Ts Stack Installation Guide
27