Control Circuit Terminal Block Functions; Input Terminals - YASKAWA CIPR-GA50UВ001AJ Series Installation & Primary Operation

10 Electrical Installation
◆

Control Circuit Terminal Block Functions

Hx-xx parameters set functions for the multi-function input and output terminals.
WARNING
that the control circuits operate correctly. If you use a drive that has incorrect control circuit wiring or
operation, it can cause death or serious injury.
WARNING
the drive before you set the Application Preset function. When you set the Application Preset function (A1-
06 ≠ 0), it changes the I/O terminal functions for the drive and it can cause equipment to operate
unusually. This can cause serious injury or death.
NOTICE
than one time each 30 minutes. If you frequently energize and de-energize the drive, it can cause drive
failure.
■

Input Terminals

Refer to Table 10.4
74
Sudden Movement Hazard. Correctly wire and test all control circuits to make sure
Sudden Movement Hazard. Check the I/O signals and the external sequences for
Damage to Equipment. Do not energize and de-energize the drive more frequently
for a list of input terminals and functions.
YASKAWA TOEPC7106170YB YASKAWA AC Drive GA500 Installation & Primary Operation