L1-04: Motor Thermistor Oh Fault Select; China Rohs Compliance - YASKAWA CIPR-GA50UВ001AJ Series Installation & Primary Operation

Finless-type ac drive, 200 v class, single-phase input: 1/6 to 3 hp, 200 v class, three-phase input: 1/6 to 25 hp, 400 v class, three-phase input: 1/2 to 25 hp
Table of Contents

Advertisement

18 China RoHS Compliance

L1-04: Motor Thermistor oH Fault Select

No.
Name
(Hex.)
L1-04
Motor
Thermistor oH
(0483)
Fault Select
0 : Ramp to Stop
The drive ramps the motor to stop in the deceleration time. The output terminal set for
Fault [H2-01 to H2-03 = E] activates.
1 : Coast to Stop
The output turns off and the motor coasts to stop. The output terminal set for Fault [H2-
01 to H2-03 = E] activates.
2 : Fast Stop
The drive stops the motor in the deceleration time set in C1-09 [Fast Stop Time]. The
output terminal set for Fault [H2-01 to H2-03 = E] activates.
18
China RoHS Compliance
The China RoHS mark is displayed on products containing six specified hazardous
substances that are in excess of regulatory limits, based on the "Administrative Measures
for the Restriction of the Use of Hazardous Substances in Electrical and Electronic
Products" and "Marking for the Restricted Use of Hazardous Substances in Electronic and
Electrical Products" (SJ/T 11364-2014), which were promulgated on January 26, 2016.
The number displayed in the center of the mark indicates the environment-friendly use
period (number of years) in which electrical and electronic products that are being
produced, sold, or imported to China can be used. The date of manufacture of the
electrical and electronic product is the starting date of the environment-friendly use period
for the product. The six specified hazardous substances contained in the product will not
leak outside of the product during normal use within this period and will have no serious
impact on the environment, the human body, or property.
The environment-friendly use period for this product is 15 years. This period is not the
product warranty period.
220
V/f
OLV
OLV/PM AOLV/PM EZOLV
OLV/PM
Sets the drive operation when the PTC input signal to the drive
is at the oH4 [Motor Overheat Fault (PTC Input)] detection
level.
15
Figure 18.1 China RoHS Mark
YASKAWA TOEPC7106170YB YASKAWA AC Drive GA500 Installation & Primary Operation
Description
Default
(Range)
1
(0 - 2)

Advertisement

Table of Contents
loading

Table of Contents