General Considerations; Safety -3 - Hanil Cellspin II User Manual

1. General Considerations

1.1 Safety
Safety precautions are to prevent personal injury, product damage, and
breakdown from possible dangers during use.
Please observe all safety measures described in this manual.
1. The centrifuge should be installed on flat surface to maintain level.
2. Check the voltage to be used, before connecting the centrifuge to the power source.
3. Only use rotors, parts, and accessories provided by Hanil Scientific Inc.
Hanil Scientific Inc. is not responsible for damages of the device and accidents caused by
using parts and accessories not recommended.
4. Do not exceed the maximum rated speed of the rotor or buckets in use.
5. Make sure to prepare necessary safety measures before using samples that are toxic or
radioactive samples or pathogenic or samples or infectious blood.
6. Substances that may generate volatile or explosive vapor can not be centrifuged.
7. If the centrifuge is contaminated by toxic or radioactive samples or infectious blood samples,
remove contaminants completely and take needful actions such as ventilation or isolation
of centrifuge.
8. The balancing work of samples should done in advance before operation.
9. Before operation, rotor and chamber should be dry.
10. Do not attempt to slow or stop the spinning rotor by hand.
11. Only centrifuge with rotor and rotor lid firmly locked.
12. Do not block vents.
13. When serving the centrifuge, be sure to remove contaminants in advance.
14. Please contact the place of purchase or Hanil Scientific Inc. for product repairs.
15.When operating according to the IEC61010-2-020 standard, the safety distance (30 cm)
around the centrifuge must be observed to preserve ventilation for smooth instrument
operation and the safety of users and the surrounding environment.
16. Turn the power switch off after using the device.
17. Disconnect the power plug before cleaning or left unused for a long period of time.
3 l www.ihanil.com