Operation - Hanil Cellspin II User Manual

4. Operation

4.1 Control Panel
Button
RPM
RCF
Time
Soft Start
Stop
Open
Start
Stop
Prog
Lamp
① / ②
③ / ④
9 l www.ihanil.com
①
②
To set the speed and for automatic conversion between RPM and RCF
To set time up to 99 min 59sec (0:00:00: continuous)
To operate with slower and smoother acceleration / deceleration
To open the instrument lid
To start or stop operation
To save the set values and recall the saved programs
① 'RPM' lamp: The light indicates that you can set the rpm.
② 'RCF' lamp: The light indicates that you can set the rcf.
③ 'Minute' lamp: The light indicates that you can set the run time in
minutes.
④ 'Second' lamp: The light indicates that you can set the run time in
seconds.
③
④
Function
Function